VIA Labs VL810 / VL811 Controller Utility / driver for Windows 7 - VIA Labs drivers for Windows 7

VIA Labs VL810 / VL811 Controller Utility / 0.88

Download Firmware drivers from VIA Labs for Windows 7

VIA Labs VL810 / VL811 Controller Utility / driver from VIA Labs for Windows XP / Windows Vista / Windows XP X64 / Windows Vista64 / Windows 7 / Windows 7 x64

Publisher review for VIA Labs VL810 / VL811 Controller Utility / 0.88:

Before install VIA Labs VL810 / VL811 Controller Utility / 0.88you should set a system restore point, to make sure you can rollback to your original driver in case you accidentally install another driver or select the driver for another version of the operating system.

Also, do not forget to check with our site as often as possible for new version of VIA Labs VL810 / VL811 Controller Utility / . We recommend to always use most recent version of a driver.

VIA Labs USB 3.0 Hub Controller Utility upgrades the firmware used by the VL810 Superspeed USB Hub Controller.

Firmware Release Note:

Release number: 0008_8

- USB 3.0:
1. Enable Function_Suspend feature.
2. Code Consolidation
3. Fixed false overcurrent message when hub firmware is updated.
4. Clear U1_timeout_val and U2_timeout_val when receiving warm reset or hot reset
5. Modify to reject power saving mode request before the hub address is assigned.
6. When a device connected to a downstream port is disconnected, the downstream port
Operating system:
Windows XP / Windows Vista / Windows XP X64 / Windows Vista64 / Windows 7 / Windows 7 x64